Canon EOS R5 - R6 video

Kosh

Kosh

Μέλος Σωματείου
7 September 2006
91,507
Εκεί ψηλά.....

Canon EOS R5 firmware v1.3​

Download firmware v1.3 for the Canon EOS R5.


1. Adds [Canon Log 3] to [Canon Log settings]. You can select [Canon Log] or [Canon Log 3] from [Canon Log settings] in the Shooting tab of the menu.


- Support for RAW movies shot with Canon Log3 and RAW (Light) will be available in Cinema RAW Development and in Digital Photo Professional version in a future update.

- Digital Photo Professional will also support the processing of RAW movies shot in Canon Log3 settings and the application of Viewing LUT in future update.



2. Adds [RAW (Light)] to the movie recording size and [IPB (Light)] to 8K/4K to enable lower bit rate shooting. These settings can also be selected when RAW+MP4 is set.


3. Adds a high frame rate of 119.9 fps/100.0 fps to the Full HD movie recording size.


4. Adds [Electronic full-time MF] to the AF tab of the menu. When a lens is attached, manual focus adjustment is always possible with both One-shot AF and Servo AF.


5. Adds [6: Monitor Off] to [Shooting info. disp.: Screen info. settings] in the Shooting tab of the menu. This update makes it possible for the camera's monitor to be turned off at all times during shooting.


6. The transfer time (estimated value) now displays on the camera monitor during FTP transfer.


7. Adds the ability, when transferring images via FTP, to select protected images that failed to be transferred and protected images that have not yet been transferred and transfer them all at once.


8. Adds [Save/load cam settings on card] to the Function settings tab of the menu. This allows you to save the camera settings to a card, or load a saved file and restore the camera to the settings you saved to a card.


9. Fixes a phenomenon, in which, in rare instances, the camera does not function normally when using certain CFexpress cards.


10. Fixes a phenomenon, in which in rare instances, the camera cannot function normally when the drive mode is set to "High-speed continuous shooting" to shoot still images continuously.

11. Fixes a phenomenon in which the power may become suspended when the camera is powered via USB for an extended period of time.


Canon EOS R6 firmware v1.3​


Download firmware v1.3 for the Canon EOS R6.


1. Adds [IPB (Light)] to 4K to enable lower bit rate shooting.


2. Adds [Electronic full-time MF] to the AF tab of the menu. When a lens is attached, manual focus adjustment is always possible with both One-shot AF and Servo AF.


3. The transfer time (estimated value) now displays on the camera monitor during FTP transfer.


4. Fixes a phenomenon, in which in rare instances, the camera cannot function normally when the drive mode is set to "High-speed continuous shooting" to shoot still images continuously.

5. Fixes a phenomenon that may corrupt the image displayed in the viewfinder.

6. Fixes a phenomenon in which the power may become suspended when the camera is powered via USB for an extended period of time.

​

 
Kosh

Kosh

Μέλος Σωματείου
7 September 2006
91,507
Εκεί ψηλά.....

Canon EOS R5 - Revolutionising videography. 8K RAW has arrived - Canon Europe

Canon EOS R5 can capture stunning 8K DCI RAW video internally to a CFexpress card and 4K DCI (full frame) at frame rates up to 120p.
www.canon-europe.com www.canon-europe.com

www.usa.canon.com

EOS R5

High Image Quality featuring a New 45 Megapixel Full-frame CMOS Sensor. DIGIC X Image Processor with an ISO range of 100-51200; Expandable to 102400*1. High-Speed Continuous Shooting of up to 12 fps with Mechanical Shutter and up to 20 fps Electronic (Silent) Shutter. Dual Pixel CMOS AF II...
www.usa.canon.com www.usa.canon.com


Aν εχω καταλαβει καλα μονον στα 8k γραφει RAW.
 
Kosh

Kosh

Μέλος Σωματείου
7 September 2006
91,507
Εκεί ψηλά.....
www.canonrumors.com

Firmware: Canon EOS R6 v1.4.0, adds Canon Log 3 #EOSR6

Canon has released firmware v1.4.0 for the Canon EOS R6, the highlight of this firmware update is the addition of Canon Log 3. Canon has also added simultaneous
www.canonrumors.com

  1. Adds [Canon Log 3] to [Canon Log settings].
  2. Simultaneous movie recording on card 1 and card 2 has been added.
  3. Improves operation stability when using the RF400mm F2.8 L IS USM and RF600mm F4 L IS USM.
  4. Fixes an issue in which, during HDMI connection, if the camera’s screen turns off, a zebra pattern is displayed via the HDMI output.
  5. Fixes an issue in which sufficient image stabilization effects may not be attained immediately after the start of shooting.
 
Kosh

Kosh

Μέλος Σωματείου
7 September 2006
91,507
Εκεί ψηλά.....
www.cined.com

Canon EOS R5 External 8K ProRes RAW Dynamic Range Lab Test – 8K Without Overheating

Interested in a quick dynamic range test of the new Canon EOS R5 8K external ProRes RAW recording mode of the Canon EOS R5 using an Atomos Ninja V+? And as a bo
www.cined.com www.cined.com


Summary​

8K ProRes RAW external recording via the Atomos Ninja V+ opens up unlimited RAW recording capabilities on the Canon EOS R5, without overheating issues. That is a big improvement.

However, external ProRes RAW files are very noisy, really “RAW”. In terms of dynamic range (as expected), the same results as with internal Canon RAW recording are obtained – shadows are a bit less noisy with internal RAW but very similar values are obtained at the signal to noise thresholds of 2 and 1.

The new Canon Log 3 internal Log gamma curve improves the dynamic range with internal H265 recording a little bit but cuts off the noise floor as well. Nevertheless, I fully recommend using Canon Log 3 if you need a more storage-efficient internal recording solution.

Hence if you want to fully exploit the capabilities of the Canon EOS R5 in terms of dynamic range and unlimited recording times without overheating, there is no way around using external ProRes RAW recording via HDMI on the Atomos Ninja V+.
 
Top Bottom